Scout Automatic Composite Sampler

Portable, Automatic Composite Sampler

    Wastewater/Industrial treatment

    Water/Wastewater Surveilance

    Compliance monitoring


  • Simple, straight foward opeartion 

  • Self-contained with carry handle NEMA-4X enclosure  

  • Optional battery operation

  • Microcontroller with simple knob controls - no programming required

  • Peristaltic pump with stainless steel bearing and rollers for corrosion-free operation


SIMPLE SETUP WITH NO PROGRAMMING


  • Set sample volume with simple calibration

  • Choose Cycle Duration - Turn off is automatic or with optional float switch

  • Time based sampling at 1,2,4 samples per hour or 1 sample every 2 or 3 hours.

  • Purge options: Before, After or Before and After sample

  • Maximum lift: 20 feet

  • Use your own sample container or select for a variety of sample bottle options
The SCOUT III Automatic Sampler is designed for portable indoor or outdoor operation in a sheltered setting. Low maintenance with quick tubing change using 2 thumb screws.

SAMPLER CONTROL PROGRAMMER

  • Solid state control
  • Easy to set up with no programming or keypad
  • Sample volume sample size between 20 and 500 ML

    • PUMP

  • Type: Peristaltic
  • Material: Polycarbonate with stainless steel rollers and shaft
  • Bearings: Low-friction ball bearings
  • Tubing: Silicone rubber (medical grade)
  • Flow rate: 1350 ML/minute at 3’ head
  • Inlet velocity: 1.5’/second at 3’ head
  • Lift: 20 feet

    • HOUSING

  • Compression-molded NOREL Hardware: Stainless Steel with hasp suitable for padlock or seal
  • Dimensions: 17” high, 14” wide, 8” deep Weight: 19 lbs (with empty sample container)

    • POWER REQUIREMENTS

  • 115 VAC, 60 HZ, 12 VDC
  • Export: 220 VAC, 50-60 HZ, 12 VDC
  • Maximum Power: 45 milliamp continuous,1 ampere intermittent

    • Download

    Desciption Download
    Scout III Sampler Literature
    Scout III Sampler Operations Manual